Here are some pics of the PC case I built. I call it "THE NUKE". The finished product pulls air from the floor via a 200mm Noctua Fan. The MSI Z370 Motherboard slides down 2 shallow slots down the middle of the 12 inch class 200 pvc pipe that is the case. The processor is a i9-9900k. The build is running 32 Gigs of DDR4 21300 RAM, and a Western Digital 2280 M.2 Drive. In the first and Last pics you can see the Corsair Closed loop cooler sitting at the top. Last but not least the Graphics card is an EVGA GTX-1080ftw. I welded some 1-inch square iron for the final frame and suspended the PVC case inside via 8 Unistrut clamp half's welded in the corners attached to some short springs that in turn connect to the U bolts attached to the PVC case. Connecting the springs was a challenge. I had my 9 year old daughter stand on the case to stretch the top springs enough to where I could connect the Lower springs. I should have taken a Pic. It was fun times.
